服务质量测量技术及其应用

文章在概述服务质量测量技术的基础上，介绍了服务质量测量技术的服务质量性能评估、网络推测、网络定位等应用，并给出了服务质量测量的一般数学模型。     

大坝监测自动化中的人工比测研究

阐述了人工比测的概念、方式和数据分析方法,对人工比测及数据分析中应注意的问题也进行了深入研究。     

TBM末端机动弹道预测

TBM末端机动弹道的预测是现代防空C^3I系统建模中重要的组成部分，它直接影响着反导武器系统对TBM拦截的精度与概率。为了精确地预测出处于末端机动条件的TBM弹道，并满足防空作战实时性的要求，本文在广义卡尔曼滤波的基础上提出了一种基于输入估计的自适应滤波方法。结论表明，该方法较其它方法更适应于解决TBM末端机动弹道预测问题，具有很好的军事应用价值。     

Accurate estimation of capacities and cross-traffic of all links in a path using ICMP timestamps

The estimation of the link capacity and its available bandwidth in an end-to-end path is crucial for network management, admission control and flow control for adaptive applications. This paper introduces an estimation mechanism able to accurately estimate the available bandwidth of all links in an end-to-end path, through its capacity and cross-traffic estimation. The estimation procedures resort to the dispersions of packet pairs and trains using the concepts of ICMP Timestamp and Traceroute that, efficiently used together, enable the measurement of the dispersions in all links in the path. These mechanisms were evaluated through simulation experiments, where we analyzed the influence of the several network parameters on each estimation mechanism. The results show that these estimation methods are able to accurately estimate both the capacity and the cross-traffic of all links in a path with moderate length and with low overhead.     

基于矢量平均的信道估计算法

提出一种适用于DS-CDMA无线通信系统的低计算量而性能良好的信道估计算法。在DS-CDMA系统中，当接收信号经过解扩或多用户检测等时域预处理后，可以认为干扰大大减弱、期望信号在处理后的信号中占主要地位。这样，用预处理后信号相关阵的最大特征值对应的特征矢量可以很好地近似期望信号的信道矢量。但是，直接特征分解需要很大的计算量，特征跟踪计算量较低，但瞬态性能较差。本文提出一种基于相关矩阵列矢量平均的信道估计算法，该算法不需要特征分解或跟踪。仿真结果表明：新算法在降低计算量的情况下可以获得同直接特征分解方法几乎相同的性能。     

Characteristic Features of the Optimal Processing of the Results of Measurements in the Case of a Random Observation Function

An analysis is made of the characteristic features and problems of the optimal processing of the results of measurements in the case of a random observation function utilizing a nonlinear Kalman filter. A method is proposed for increasing the convergence domain of the filter with additional processing of measurements in the frequency domain.     

一种新的基于快速功控的多普勒估计

针对采用快速功控的移动通信系统提出了一种简便的多普勒估计方法。该方法利用功控后的接收信号电平的平稳性与最大多普勒频移有密切关系这一特点，通过测量接收信号电平的平稳性估计多普勒频移。文中在单径瑞利衰落信道条件下对这一方法进行了仿真验证，并同文献中提出的COV方法进行了比较，仿真结果表明在信道变化不是太快时本方案有较好的估计精度。     

Reconfigurable hardware implementation of a phase-correlation stereoalgorithm

This paper describes the implementation of a stereo-vision system using Field Programmable Gate Arrays (FPGAs). Reconfigurable hardware, including FPGAs, is an attractive platform for implementing vision algorithms due to its ability to exploit parallelism often found in these algorithms, and due to the speed with which applications can be developed as compared to hardware. The system outputs 8-bit, subpixel disparity estimates for 256× 360 pixel images at 30,fps. A local-weighted phase correlation algorithm for stereo disparity [Fleet, D. J.: {Int. Conf. Syst. Man Cybernetics 1:48–54 (1994)] is implemented. Despite the complexity of performing correlations on multiscale, multiorientation phase data, the system runs as much as 300 times faster in hardware than its software implementation. This paper describes the hardware platform used, the algorithm, and the issues encountered during its hardware implementation. Of particular interest is the implementation of multiscale, steerable filters, which are widely used in computer vision algorithms. Several trade-offs (reducing the number of filter orientations from three to two, using fixed-point computation, changing the location of one localized low-pass filter, and using L1 instead of L2 norms) were required to both fit the design into the available hardware and to achieve video-rate processing. Finally, results from the system are given both for synthetic data sets as well as several standard stereo-pair test images.     

分形方法对裂缝性储集层的定量预测研究和评价

隐蔽类油气藏同构造类油气藏一样，目前已成为我国油气勘探工作的重点领域，而且随着勘探工作的深入，隐蔽类油气藏必将是油气储量增长的主要来源。裂缝性油气藏是隐蔽类油气藏中最为复杂、勘探难度最大且产量较高的一类油气藏。为了提高裂缝性油气藏的勘探成功率。以辽河盆地火山岩裂缝油气藏的勘探为例，在分析和研究不同类型裂缝性油气藏的测井响应特征，利用电导率测井、声波测井、放射性测井和地层倾角测井等测井方法对裂缝性储层进行测井识别的基础上，引进分形模型方法对裂缝性储层的表征参数——裂缝发育程度和裂缝密度进行了定量预测，从而达到对裂缝性储层的孔隙度进行定量评价。     

基于支持向量机的缓存预估模型的设计与实现

采用支持向量机(SVM)对网络业务流数据进行预测估计，通过训练样本，从而获得样本以外数据的分布规律。在此基础上，设计了一种网络排队队列缓存的预估模型。实验表明，该模型具有较高的训练效率和很高的估计精确度。